Skip to content
Dansk
Contact
← All articles

Grid congestion and redispatch: What happens when the grid is full?

One of the more counterintuitive features of the Danish electricity system is that there can be plenty of power and still a problem. The problem is not alway...

One of the more counterintuitive features of the Danish electricity system is that there can be plenty of power and still a problem. The problem is not always a shortage of generation, but a shortage of space in the grid to transport it. That is the core of what is called grid congestion, or a bottleneck in the electricity network.

This article explains what congestion is, how the system operator handles it through redispatch and countertrade, why renewable generation is sometimes downregulated, and where a battery can and cannot make a difference. The angle is the system's and the market's, as a supplement to our earlier article on grid congestion in the BESS101 series.

What congestion is

The electricity grid is built in layers. The transmission grid carries large volumes of power over long distances at high voltage and is operated by Energinet, Denmark's national transmission system operator. The distribution grid carries power the last stretch out to businesses and households at lower voltage and is operated by the local grid companies. Congestion arises when a part of the grid does not have the capacity to transport the power that needs to flow through. It can happen on a single connection between regions or countries, and it can happen locally in the distribution grid.

For a business, bottlenecks rarely show up as a blackout at the outlet. They show up as constraints: an application for a larger grid connection that drags on, capacity that cannot simply be expanded, or an area where there is no room for more large consumers or producers right now. Congestion is, in other words, increasingly a question of access and timing, not only of security of supply.

Redispatch and countertrade

When the grid is approaching full at a given point, the system operator cannot simply let the power flow. Instead, measures are taken to relieve the bottleneck. That happens through redispatch and countertrade, among other measures, where some plants are asked to produce less on one side of the bottleneck while others produce more on the other side, so the load on the stressed connection falls. Energinet keeps ongoing statistics on countertrade as part of operating the electricity system.

Redispatch solves the acute problem, but it is not free, and it does not remove the underlying cause. It is an operational tool for handling a bottleneck here and now, not a substitute for the grid capacity that is missing. That is why congestion is also one of the factors that supports better use of the existing grid and expanding the grid where the need is greatest.

Congestion as a price difference

Congestion shows up not only technically, but also in the market. Denmark is split into two price areas, DK1 and DK2 (Western and Eastern Denmark), and when there are bottlenecks between areas, prices can differ on each side. Price differences between bidding zones are therefore a market symptom that the grid cannot freely transport power to where it is cheapest, as described in Energinet's Electricity Market Report 2025.

On the interconnectors, those price differences give rise to so-called congestion revenues: income that arises when power flows between price areas with different prices. Forsyningstilsynet, the Danish Utility Regulator, reports Energinet's congestion revenues annually. It is worth keeping two things apart: congestion revenues are income from price differences on interconnectors, while redispatch and countertrade are a cost of relieving bottlenecks. Both concern congestion, but they are not the same ledger.

When generation exceeds what the grid can take

Denmark has a very high share of solar and wind in its electricity supply. In 2024, renewable energy sources covered a large part of consumption, and in a significant share of the year's hours, production from solar and wind exceeded total consumption, as described in Energinet's review of the year 2024. When generation is high, consumption is low, and the grid is constrained at the same time, situations arise where there is more power than can be used or transported.

In those situations the price can fall to zero or turn negative, and part of the renewable generation can be downregulated because it can neither be absorbed locally nor carried away. Reducing this downregulation of renewable energy is one of the matters Energinet works with in operating the system, cf. the report on security of electricity supply. For industry the point is that surplus and bottlenecks are linked: the challenge is not a shortage of green power, but the ability to use it at the right time and in the right place.

For a flexible consumer it is at the same time the other side of the same coin. The hours with surplus and low prices are also the hours when it is cheapest to absorb energy. A business that can shift consumption or store energy can in principle benefit from the periods that, for the system, are a challenge. That is part of the background for flexibility and storage becoming more valuable as generation becomes more variable. It does not change the fact that the bottleneck in the grid itself still has to be handled by the system.

Where a battery can make a difference

A battery can help with congestion in a practical way. It can absorb energy locally when there is surplus and the grid is stressed, and deliver it again when there is demand. In that way it shifts energy in time and relieves the local part of the grid in the most loaded hours. Green Power Denmark points out that flexibility, including batteries, can supplement the expansion of the electricity grid and in some cases defer or reduce the need for grid reinforcements, but that it requires clear frameworks and a market design that gives an incentive to participate.

The wording "supplement" is important. A battery does not add transport capacity to the grid. It does not change how many megawatts a given connection can carry. What it can do is reduce the need to draw on the stressed connection in peak periods by delivering locally. In that sense the battery is a local flexibility tool, not a solution to overall grid expansion.

What a battery cannot solve

It is equally important to be clear about the limits. A battery on a business site does not solve congestion in the transmission grid, and it does not give the business a guarantee of faster grid connection or more capacity. Those matters depend on the grid company's and Energinet's planning and on the physical expansion of the grid.

A battery also cannot remove the fundamental imbalance between where power is produced and where it is consumed. It can relieve locally and shift energy in time, but the large structural bottlenecks between regions and countries are solved through grid expansion, market design and system operation. The effect of a single installation also depends on local conditions: how stressed the grid is right there, what the consumption profile looks like, and how large a share of capacity is available for the purpose. We are therefore cautious about presenting a battery as an answer to congestion in itself. It is one piece that can contribute locally, in interaction with the rest of the system.

ZynexGroup's approach to site assessment

When we assess an installation, we look at the specific grid connection and at the consumption profile, because that is where a battery's local contribution has to make sense. We assess when during the day the grid and consumption are most stressed, and whether an installation can realistically relieve in those periods. On that basis we have a data-based conversation about what a battery can contribute locally, without promising that it can solve matters that lie outside the installation's reach.

Overall perspective

Grid congestion is not about how much power is produced, but about how much the grid can transport, and where. The system operator handles bottlenecks through redispatch and countertrade, and in periods of surplus, renewable generation can be downregulated. A battery can relieve locally and shift energy in time, but it does not add grid capacity and does not solve the structural bottlenecks on its own.

For industrial businesses the usable point is that flexibility supplements grid expansion rather than replacing it. A battery can be a local advantage in a stressed grid, but it should be assessed for what it can actually do, not for what one might wish it could.

Have the potential for your site assessed

If you want to know how an industrial BESS installation interacts with your grid connection and local conditions, we start from your own data: grid connection, consumption profile and history. On that basis we produce an initial assessment of whether there is a match, and what the next step could then be. You are welcome to contact us.